Description:
The 7705CWDM’s are bi-directional Multiplexors/De-multiplexors that combine/separate up to 16 different wavelengths over a single fiber. The 7705CWDM-M4/D4 and 7705CWDM-M8/D8 are designed to mux/demux 4 and 8 wavelengths respectively while the 7705CWDM-M8LB/D8LB are designed to expand the 4 and 8 wavelengths systems to 12 and 16 wavelengths over a single fiber.
The 7705DWDM’s are bi-directional Multiplexors/De-multiplexors that combine/separate up to 40 DWDM wavelengths over a single optical fiber. These modules utilize 100GHz/0.8nm channel spacing in the C-Band and are available in cascadable eight wavelength mux/demux versons. These modules have also been designed to work with existing Evertz 7705CWDM modules.
Two cascaded, eight channel 7705DWDM’s (16 DWDM wavelengths) can be inserted into specific wavelength slots of the 7705CWDM’s, combining both CWDM and DWDM technologies to offer the most cost effective wavelength multiplexing solution available.
Both are housed in Evertz’s standard 3RU or 1RU Multiframe. |
Features:
7705CWDM
• Bi-directional mux/demux of up to 16 wavelengths in the 1270nm to 1610nm spectrum (ITU-T G.694.2 compliant)
• Expandable from 4 or 8 to 12 or 16 channel systems
7705DWDM
• Cascadable eight channel mux/demux modules
• ITU-T G.692 compliant 100GHz/0.8nm channel spacing
• Capable of being inserted into CWDM wavelength slots adding an additional 8, 16 or 24 DWDM wavelengths to existing CWDM systems
7705CWDM & DWDM
• Passive design for any bit rate
• Low insertion loss to conserve system power
• High optical isolation for low crosstalk
• Fully hot swappable from front of frame with no fiber disconnect/reconnect required
• SC/PC, ST/PC, FC/PC connector options
• Fiber protector to prevent connector damage |
