Description:
The ASD-880 stereo audio distribution amplifier is designed to meet the most demanding requirements of broadcast facilities, television post-production, and recording studios. This excellent amplifier provides two high performance channels with four balanced outputs per channel. Outputs can be customized to low (66 ohm), as per AES recommendation 1708 (I-3), or 600 ohm impedance. Future impedance modifications are also possible, should requirements change. Excellent output isolation and interchannel crosstalk is assured by the use of individual drivers for each output.
The input is over-voltage protected up to 120 Volts AC or DC. The transformerless, balanced input is normally bridging, but can be terminated by installing a suitable resistor. Unbalanced input is converted to balanced output.
The ASD-880 exceptional performance features include 100 dB S/N ratio, flat frequency response, carefully controlled roll-off and very low distortion, thus ensuring a virtually transparent transmission path.
See the FR-883/4 Mounting Frames for use with any type of the 880 Series Audio Distribution Amplifiers in any slot. |
Features:
 1 in 4 out stereo
Compatible with all Leitch audio DA frames
Available in 66 ohm, or 600 ohm output impedance
Very low noise (100 dB S/N)
Excellent interchannel crosstalk (>95 dB)
Gain range of -6 to +33 dB |
