Description:
The analog audio input module receives up to 64 inputs. These inputs are used as 32 inputs of both left and right channels of a stereo pair. The input module drives each signal into crosspoint sub-modules plugged-in as daughter cards on the input card. Each crosspoint sub-module provides a 32x32 crosspoint array for switching all 32 inputs on one side of the card to up to 32 outputs. Two 32x32 crosspoint modules can be plugged onto each side of an input module for a total of 32x64 on each side.
The Analog Audio Output Module drives up to 64 outputs. These outputs are used as 32 outputs of both left and right channels of a stereo pair.
An optional Output Monitoring sub-module may also be plugged onto the Output Modules to provide the user with a monitoring output.
This router may be configured and built as a mono, stereo, or dual mono system.
Each input and output module provides 2 LEDs. One is a green LED to indicate that power supplied by the on-board DC-DC converter is OK. The other yellow LED indicates that the card has been detected and is up to date. |
Features:
 Field expandable from 32x32 to 128x128
200 Khz. Bandwidth
Optional monitoring
Soft matrix partitioning of hardware matrices and
Flash Memory storage of all configurations
600-ohms version available
Redundant power supply and logic control card optional
Front-loading modules for expansion and serviceability |
